"Ute" - Australian for pick-up truck...

UTE BULLBARTM

Dodge Ram Mounting Instructions


3rd Generation Ram download instructions in PDF format
File size 340 KB

2nd Generation Ram download instructions in PDF format
File size 599 KB



3rd Generation Dodge Ram instructions
(please read the special note below!)

Special note on the new 3rd Generation Ram instructions.

The first step should be to wire the turn indicator lights. Just unbolt the lights from the Ute Bullbar by removing the two nuts on the back side of the bumper. You have to remove the factory headlight units to get to the wiring, so this is best accomplished by taking this step first.Replace the lights and let the Bullbar turn indicators hang while installing your Bullbar. Simply bolt them in place once you have the Bullbar on the truck.

3rd Generation Ram download instructions in PDF format
File size 340 KB


2nd Generation Dodge Ram instructions

NOTE: For replacement fog lights or if you are adding factory fog lights to your truck, use Mopar part number 55076942AB.

2nd Generation Ram download instructions in PDF format
File size 599 KB


Call toll-free 1-TON-UTE-BEDS or 1-866-883-2337



Home | About Ute | Ute Bed®/Ute Tray® | Accessories | Where to Buy | Media + Buzz | Gallery |
Slide Shows | Ute + Community | Ute Bed® Applications | Fleet Buyers | Contact Us

©2007 - Ute Ltd | PO Box 46457, Seattle WA 09146-0457 | Call 1-TON-UTE-BEDS
Site design & all media communications by SirenSong Productions